CHIDLOW & THE PERTH HILLSComfort starts close to home.

SPLIT SYSTEM AIR CONDITIONING · PERTH HILLS & EASTERN SUBURBS

Comfort for
every season.

Hills Split Systems logo
ABN 97 574 518 896ARC Refrigerant Handling Licence L223664

Split system installation and replacement for heating and cooling in the Perth Hills.

New installations, reverse-cycle heating and cooling, and replacement of existing split system air conditioners.

Based in Chidlow. Focused on home comfort.

A bright living room with a wall-mounted split system air conditioner above a comfortable sofa
YOUR LOCAL BUSINESSChidlow & the Perth HillsInstallation & replacement
AUSTRALIAN BUSINESS NUMBERABN 97 574 518 896View on ABN Lookup
REFRIGERANT HANDLINGARC Refrigerant Handling Licence L223664Daniel FisherRSS03 — Restricted split system installation & decommissioning, up to 18 kWCheck licence with ARC

A BETTER FIT FOR YOUR HOME

Make yourself
comfortable.

A new space to heat or cool, or an old air conditioner to replace? Let’s talk about what your home needs.

01NEW INSTALLATION

New split system
installation

Bring comfort to a bedroom, living area or home office. Share your room size and a few details so we can discuss the right next step.

  • Bedrooms, living rooms & home offices
  • Discuss unit size and placement
  • Confirm the installation scope
Plan your installation
02REPLACEMENT

Existing system
replacement

Ready to replace an ageing split system? Tell us about your current unit and its location so we can discuss the replacement work.

  • Replace an ageing split system
  • Review the existing location and connections
  • Include removal in the quote discussion
Discuss a replacement

Our focus is single-head split systems. Include the model and capacity in your enquiry if you know them.

PLAN YOUR INSTALLATION

What size could suit
your room?

Measure your floor area for a rough guide to cooling capacity. We’ll check the details with you before choosing a system.

Start with your measurements

Enter metres, wall to wall. For example, 4.5 m.

YOUR ROUGH SIZING GUIDE

A few measurements.
A useful starting point.

Enter your room’s length and width, then calculate to see its floor area and an indicative cooling-capacity range.

Room size is only part of the picture.

Ceiling height, insulation, window size, sun exposure and open-plan layout all affect the capacity needed. This is a rough guide only. We’ll assess your heating and cooling needs before recommending a system.

How to measure your room in square metres
A rectangular room 5 metres long and 4 metres wide has an area of 20 square metres.5 m long4 m wide20 m²5 × 4 = 20
Example floor plan · not to scale
  1. Measure length and width. Use a tape measure along two adjoining walls. Keep both measurements in metres: 450 cm or 4,500 mm is 4.5 m.
  2. Multiply them together. Length × width = floor area in m². A 5 m × 4 m room is 20 m². Leave furniture in the measurement.
  3. Include connected open space. For an L-shape, divide the floor into two rectangles that don’t overlap. For example, 5 × 4 plus 2 × 3 = 26 m². Tick “Add a second rectangular section” above.

Ceiling height doesn’t go into the floor-area calculation, but mention high or raked ceilings in your enquiry. For separate closed rooms, measure each individually.

How this rough guide works

The calculator matches your floor area to the capacity bands in CHOICE’s room-sizing guide. It doesn’t calculate your home’s heat load or adjust for Perth weather. For rooms below 8 m² or above 80 m², we show the area and ask you to discuss sizing with us.

The kW figure describes cooling capacity, rather than electricity use. Heating capacity needs a separate check.

FROM FIRST ENQUIRY TO SWITCHING ON

Know what happens next.

A clear scope and an agreed plan before installation day.

  1. 1

    Tell us about your space

    Send your suburb, the type of job and a few details. Photos of the room or existing unit can help.

  2. 2

    Work through your quote

    Confirm the system, its position, access and any electrical work. Review what is included before agreeing to proceed.

  3. 3

    Agree on installation day

    Arrange a suitable time and confirm the work, testing and handover covered by your quote.

MEET YOUR LOCAL

Your place.
Our patch.

Based in Chidlow, with a focus on homes across the Perth Hills. From a warm bedroom to the family living room, comfort starts with understanding your space.

Daniel FisherHills Split Systems · Chidlow

I’m Daniel, the person behind Hills Split Systems. Based in Chidlow, I focus on split system installation and replacement for homes across the Hills. Tell me what you’re looking for and we can work through the next step.

BASED IN CHIDLOW

The Hills & Perth’s east.

Servicing the Perth Hills and Perth’s eastern suburbs, with enquiries welcome from across Perth.

We travel from Chidlow for installations across the Hills, Perth’s east and surrounding areas, generally within around 90 minutes by road. Send your suburb so we can confirm the visit.

Explore our service areasRequest a quote

PLAN YOUR NEXT STEP

A clearer installation plan.

Explore the details before you request a quote.

BEFORE YOU BOOK

A few good
questions.

You don’t need to know all the technical details to get started.

Ask Daniel a question
What do you need to prepare a quote?

Your suburb, whether it’s a new installation or replacement, and the room you want to heat or cool. If you have them, include the unit model, room dimensions and photos. We’ll follow up about anything else needed.

Can I enquire if I haven’t chosen a system?

Yes. Select “I’m not sure yet” in the enquiry form and describe your space. Room size, layout and how you use it help guide the conversation.

What affects the installation price?

The unit, indoor and outdoor positions, access, pipe run, drainage, electrical requirements and any old-system removal can all affect the work involved. These details need to be checked before a final quote is agreed.

What about the electrical work?

We coordinate all electrical work required for your installation, with the work and costs clearly included in your quote.

Can I send photos of my existing air conditioner?

Yes. Email photos of the indoor unit, outdoor unit and model label to info@hillssplitsystems.com.au. Include your name and suburb so we can match them to your enquiry.

LET’S TALK ABOUT YOUR HOME

Year-round comfort
starts here.

Tell us a little about the job and how to contact you. Send your enquiry below and we’ll be in touch to discuss your quote.

A photo is a useful starting point.

Email a view of the room, outdoor location or existing unit. No measurements yet? That’s fine.

Hills Split SystemsABN 97 574 518 896

ARC Refrigerant Handling Licence — Daniel Fisher · L223664

RSS03 — Restricted split system installation & decommissioning, up to 18 kW

We’ll use these details to respond to your enquiry and arrange your quote.

Email DanielRequest a quote